Grip-type single-axis operating Joystick

Product Features Uniaxial front-back operation or unidirectional operation. Friction positioning or spring return, mechanical lock can be selected for neutral position and starting point. Choice of potentiometer or non-contact Hall angle detection method. Optional direction micro switch (switch maximum current 10A @ 30Vdc). It can be equipped with the upper end of a variety of handles.

single-axis joystick:

Product description

Product Features

Uniaxial front-back operation or unidirectional operation.

Friction positioning or spring return, mechanical lock can be selected for neutral position and starting point.

Choice of potentiometer or non-contact Hall angle detection method.

Optional direction micro switch (switch maximum current 10A @ 30Vdc).

It can be equipped with the upper end of a variety of handles.

 

 

Application range

This series of products are mainly used in electro-hydraulic control systems or other electrical control systems of various engineering vehicles.

 

Technical Information

 

Electrical parameters

Potentiometer type

Power supply voltage

<36Vdc

Total resistance value

 10KΩ (± 10%)

Center dead zone angle

 ± 3 °

Maximum power

0.2W

 

Hall type

Power supply voltage

 5 ± 0.5Vdc

Power supply current

<11mA (rated power supply voltage)

Limit allowable voltage

20Vdc

Reverse limit allowable voltage

-10Vdc

Linear error of output voltage

<± 0.2V

With conversion circuit

Input voltage

 18 ~ 36Vdc (U 21 ~ U 25)

 

9 ~ 36Vdc (I 21 ~ I 22)

Power consumption current

 <20mA

Maximum output current

 10mA (at standard voltage output)

 

 

 

Micro Switch

Load capacity

10A @ 30Vdc (resistive load)

Service life

more than 30 million times (mechanical)

 

200,000 times (electrical)

Insulation resistance

> 100MQ (500Vdc insulation resistance meter)

Insulation resistance

> 100MQ (500Vdc insulation resistance meter)

Starting angle

± 5 °

 

 

 

Mechanical parameters

Rocking angle

± 37.5 ° or 75 ° (single direction)

Mode of operation

Automatic spring reset or friction positioning

Starting force

 8N (spring) 16N (friction)

Maximum operating force

18N (spring) 16 (friction)

Limiting force

> 300N

Service life

> 2 million times (potentiometer type)

 

> 5 million times (Hall type)

Weight

500g (no upper end)

 

 

Environmental parameters

Working temperature

 -30 ~ + 70

Storage temperature

-40 ~ + 85

Protection grade

IP65 (above the installation panel)

 

 

Product selection

 

series

HJ20

 

Operation method

Friction positioning

FCF

 median with feel

FEF

starting with feel

FCL

neutral mechanical lock

FEL

starting point mechanical lock

Spring return

SCO

 back to median

SCL

 back to neutral position, neutral mechanical lock

SEO

back to the beginning

SEL

 back to starting point, starting point mechanical lock

Note:

The mechanical lock is only applicable to the upper end of the BG handle

 

Micro switch (not available when CAN bus is output)

MS00

 without micro switch

MS22

with 10A front and back position micro switch

MS23

 with 10A neutral position normally closed and front and back position micro switch

output signal

 


Potentiometer type (power supply voltage <36VDC)

P101

 10KQ center tapped potentiometer

The

Hall type (supply voltage 5VDC)

H51

 0.5 ~ 2.5 ~ 4.5VDC voltage output

H52

0 ~ 2.5 ~ 5VDC voltage output

H53

 1.25 ~ 2.5 ~ 3.75VDC voltage output

With conversion circuit

U21

 with conversion circuit, power supply voltage 18 ~ 36VDC, -10V ~ 0V ~ + 10V voltage output

U22

 with conversion circuit, power supply voltage 18 ~ 36VDC, + 10V ~ 0V ~ + 10V voltage output

U23

 with conversion circuit, power supply voltage 18 ~ 36VDC, -5V ~ 0V ~ + 5V voltage output

U24

 with conversion circuit, power supply voltage 18 ~ 36VDC, + 5V ~ 0V ~ + 5V voltage output

U25

 with conversion circuit, power supply voltage 18 ~ 36VDC, 0V ~ + 10V voltage output

U26

with conversion circuit, power supply voltage 18 ~ 36VDC, 6V ~ 12V ~ 18V voltage output

I21

 power supply voltage 9 ~ 36VDC, two-wire system 4MA ~ 12MA ~ 20MA current output

I22

power supply voltage 9 ~ 36VDC, two-wire system 20MA ~ 4MA ~ 20MA current output

NA

 no analog signal output

 

Upper end of handle

BG

 upper end of BG type handle, top palm operation

HB

 HB type handle upper end, no button

HBS

 upper end of HBS type handle with one button

HBR

 HBR type handle upper end with rocker on top

 

Outgoing way

L

wire output (without shell

A

AMP connector

 

Electrical Installations

 

Pin Potentiometer type Hall type Voltage output with conversion circuit Current output with conversion circuit

1 5VDC power supply voltage at the front end of the potentiometer

2 Unidirectional empty GND

3 Rear end of potentiometer GND output + empty

4 Potentiometer wiper output output-empty

5 Front direction switch (normally open) Unidirectional start switch (normally open)

6 Common terminal of forward direction switch

7 Rear direction switch (normally open) One-way empty

8 Common terminal of rear direction switch One-way empty

9 Rocker switch left direction (normally open)

10 Common end of handle upper switch

11 Rocker switch right direction (normally open)

 

  • Company Profile


    Shanghai Qinyu Electronics Co., Ltd. is a technology enterprise dedicated to the research and development, design, assembly, sales, and service of intelligent safety control systems, electronic control handles, signal products, and high machinery accessories. The company has specialized enterprise technology centers, assembly and manufacturing centers, product testing centers, warehousing and logistics centers, and operation centers, serving sustainable green and healthy development. It provides efficient, reliable, and satisfactory services and products for the new generation of intelligent, remote high-altitude work platforms and smart engineering machinery.

  • Certificates


Inquiry
Please feel free to give your inquiry in the form below.We will reply you in 24 hours.
*
*